Close

The Run Down on your Vehicle’s Air Conditioning

 

Spring came quickly in the Carolinas, and with it came very hot days. Nothing beats getting in your car to escape the heat and turning on your A/C – and nothing is worse than the day that A/C stops working. We wanted to break down the concept of air conditioning in your vehicle to help you understand, and appreciate, just how it works.

 

How does car air conditioning work?

Here’s exactly what happens when you flick the switch to turn your car air conditioner on:

  • A compressor pressurizes and compresses a refrigerant (which is now a gas).
  • The compressed refrigerant moves to a condenser between your grille and radiator. A fan cools the refrigerant, which leaves the condenser as a liquid.
  • After a short visit to a receiver/dryer, which removes moisture from the AC system, the liquid refrigerant passes through an expansion valve or orifice tube, depending on the make and model.
  • As it passes through the valve or tube, the refrigerant turns back into a gas, reducing the pressure and dropping its temperature.
  • An evaporator removes leftover heat as a blower sends air over the cooled refrigerant into your vehicle. (It’s similar to blowing across an ice cube.)
  • The refrigerant returns to the compressor and the process starts over.

 

What is a refrigerant?

A refrigerant cools or freezes something. A refrigerant called R12 was the most common type used in air conditioning for cars for decades. The Environmental Protection Agency banned it 20 years ago because of concerns over potential harm to the ozone layer. Its replacement, R134A, is now facing a similar fate. The EPA is calling for it to be phased out in vehicles over the next several years in favor of more environmentally friendly substances.

 

What does it mean to have the AC system charged?

Many drivers have their systems charged because of a leak in a seal or line, or in a major component such as the compressor, condenser or evaporator. Some technicians run colored dye through the system to identify potential trouble spots.

 

What about the stuff at the local automotive parts store for a DIY charge?

AC charge kits are pretty common. Be careful not to overcharge the system by adding too much refrigerant, which can have the same impact as not having enough of the chemical. Be sure to follow the directions that come with each kit.

 

What’s the difference between the fresh air and recirculation cycles?

A vehicle’s recirculation cycle uses already refrigerated air from the cabin and runs it through the air conditioning system once more. While this might seem like a way to get even colder air, it’s a good idea to use your fresh air cycle. Doing so can limit the potential for mold buildup in the system.